Busca Hojalata, Metal Puede, Impresión De La Hojalata en el directorio Industry, Reliable fabricante / proveedor / fábrica de China

Home > Lista de Producto > Productos de hojalata > Impreso de hoja de lata > CA de T4 jis g 3303 hojalata electrolítica

CA de T4 jis g 3303 hojalata electrolítica

Información básica

Modelo: 150522-05

Descripción del producto

Specifications

primer hojalata eléctrica:
Thickness:
Width 0.18 a 0,45 mm: 600 a 980mm
Temper grado: BA y CA
For metal envases usage


producir hojalata eléctrica principal profesionalmente en Especificación China.
la hojalata como el siguiente:
1, norma de referencia: GB2520-88, JIS G3303-1997 y DIN EN10203-91
2, Material: MR
3, grueso disponible: 0.18 m m a 0.45mm
4 , Anchura disponible: 600mm a 980mm
5, grado de genio: T1 - T5 BA y CA.
6, recubrimiento de estaño: 2.8g/2.8g normal, 5.6g/5.6g, también podemos producir según requests
los clientes 7, diámetro de la bobina: ID 420 / 508 mm, OD de 1.000 a 1, 250mm
8, paquete: papel antioxidante, esquina protegida. por hoja o bobinas según cliente requiere.
9, aplicaciones: uso paquete de metal como pintura, producto químico puede, aerosol can y diverso alimento producción, batería, cable eléctrico y otros

industries






Standard for temper
Chinese Standard Japanese Standard American Standard  European Standard
GB/T 2520-2008 JIS G3303-2008 ASTM A623M-06a DIN EN10202-2001
T-1  T-1 T-1 (T49) TS230
T1.5
T-2 T-2 T-2 (T53) TS245
T-2.5 T-2.5   TS260
T-3 T-3 T-3 (T57) TS275
T-3.5 TS290
T-4 T-4 T-4 (T61) TH415
T-5 T-5 T-1 (T65) TH435
DR-7M DR-7.5 TH520
DR-8 DR-8 DR-8 TH550
DR-8M DR-8.5 TH580
DR-9 DR-9 DR-9 TH620

Tinplate specifications
Steel Type       SPCC, MR
Temper(BA&CA)      T1~T5
Coating      1.1~11.2g/m2
Thickness and tolerance      0.15~0.50mm(Tolerance: _+0.01 mm)
Width & tolerance       300~1000mm (Tolerance: 0~3mm)
Cut length & tolerance         450~``50mm (Tolerance: 0~3mm )
Coil inside diameter       420/508mm
Coil Weight         3~10 MT
Passivation         311
Oiling               DOS
Surface Finish       Bright, Stone, Silver, Matte
Packaging             Seaworthy Standard with wooden pallet
Standards Available       GB/T2520, JIS G3303, ASTM A623M & EN10202
Special specitications are available on request.
Tin coating weight
Type Designation of tin       coating weight Min.average tin coating weight(g/m2) Former Coating Designation
Equal tin coating 1.4/1.4 1.2/1.2 #15
2.2/2.2 2.0/2.0 #20
2.8/2.8 2.45/2.45 #25
5.6/5.6 5.05/5.05 #50
8.4/8.4 7.55/7.55 #75
11.2/11.2 10.1/10.1 #100
Differentially Coating 1.4/2.8 1.2/2.45 #15/25
2.2/2.8 2.2/2.45 #20/25
2.8/5.6 2.45/5.05 #25/50
2.8/8.4 2.45/7.55 #25/75
2.8/11.2 2.45/10.1 #25/100
5.6/8.4 5.05/7.55 #50/75
5.6/11.2 5.05/10.1 #50/100
8.4/11.2 7.55/10.1 #75/100
Surface finish
Surface finish Nominal surface roughness (um Ra) Characteristic
Bright finish Q0.35 Glazed surface obtained after melting treatment of electrotinned smooth raw materail strip with extremely fine rubstone fingure by processing.
Stone finish 0.25~0.60 Glazed surface obtained after melting treatment of electrotinned smooth raw materail stripfeaturing certain rubstone figures.
Silver finish 0.50~1.00 Glazed surface obtained after melting treatment of electrotinned smooth raw material strip with rough matt furface.
Matte finish 0.80~2.50 Matt surface of general matt raw material strip without melting treatment.





cuadros de la fábrica:


 

Grupos de Producto : Productos de hojalata > Impreso de hoja de lata