primera hoja de hojalata y bobinas EN10202 Señor estándar
Información básica
Modelo: HT-115
Descripción del producto
| Standard for temper | |||
| Chinese Standard | Japanese Standard | American Standard | European Standard |
| GB/T 2520-2008 | JIS G3303-2008 | ASTM A623M-06a | DIN EN10202-2001 |
| T-1 | T-1 | T-1 (T49) | TS230 |
| T1.5 | — | — | — |
| T-2 | T-2 | T-2 (T53) | TS245 |
| T-2.5 | T-2.5 | TS260 | |
| T-3 | T-3 | T-3 (T57) | TS275 |
| T-3.5 | — | — | TS290 |
| T-4 | T-4 | T-4 (T61) | TH415 |
| T-5 | T-5 | T-1 (T65) | TH435 |
| DR-7M | — | DR-7.5 | TH520 |
| DR-8 | DR-8 | DR-8 | TH550 |
| DR-8M | — | DR-8.5 | TH580 |
| DR-9 | DR-9 | DR-9 | TH620 |
| Electrolytic Tinplate sheet coil specifications | |||
| Steel Type | SPCC, MR | ||
| Temper(BA&CA) | T1~T5 | ||
| Coating | 1.1~11.2g/m2 | ||
| Thickness and tolerance | 0.15~0.50mm(Tolerance: _+0.01 mm) | ||
| Width & tolerance | 300~1000mm (Tolerance: 0~3mm) | ||
| Cut length & tolerance | 450~``50mm (Tolerance: 0~3mm ) | ||
| Coil inside diameter | 420/508mm | ||
| Coil Weight | 3~10 MT | ||
| Passivation | 311 | ||
| Oiling | DOS | ||
| Surface Finish | Bright, Stone, Silver, Matte | ||
| Packaging | Seaworthy Standard with wooden pallet | ||
| Standards Available | GB/T2520, JIS G3303, ASTM A623M & EN10202 | ||
| Special specitications are available on request. | |||
| Tin coating weight | |||
| Type | Designation of tin coating weight | Min.average tin coating weight(g/m2) | Former Coating Designation |
| Equal tin coating | 1.4/1.4 | 1.2/1.2 | #15 |
| 2.2/2.2 | 2.0/2.0 | #20 | |
| 2.8/2.8 | 2.45/2.45 | #25 | |
| 5.6/5.6 | 5.05/5.05 | #50 | |
| 8.4/8.4 | 7.55/7.55 | #75 | |
| 11.2/11.2 | 10.1/10.1 | #100 | |
| Differentially Coating | 1.4/2.8 | 1.2/2.45 | #15/25 |
| 2.2/2.8 | 2.2/2.45 | #20/25 | |
| 2.8/5.6 | 2.45/5.05 | #25/50 | |
| 2.8/8.4 | 2.45/7.55 | #25/75 | |
| 2.8/11.2 | 2.45/10.1 | #25/100 | |
| 5.6/8.4 | 5.05/7.55 | #50/75 | |
| 5.6/11.2 | 5.05/10.1 | #50/100 | |
| 8.4/11.2 | 7.55/10.1 | #75/100 | |
| Surface finish | |||
| Surface finish | Nominal surface roughness (um Ra) | Characteristic | |
| Bright finish | ≤Q0.35 | Glazed surface obtained after melting treatment of electrotinned smooth raw materail strip with extremely fine rubstone fingure by processing. | |
| Stone finish | 0.25~0.60 | Glazed surface obtained after melting treatment of electrotinned smooth raw materail stripfeaturing certain rubstone figures. | |
| Silver finish | 0.50~1.00 | Glazed surface obtained after melting treatment of electrotinned smooth raw material strip with rough matt furface. | |
| Matte finish | 0.80~2.50 | Matt surface of general matt raw material strip without melting treatment. | |
Grupos de Producto : Productos de hojalata > Hojalata eléctrica
Otros productos
Productos hot
Precio bajo! Serie 1000 Material Aluminio 1-7mm Bobina GruesaConjunto de herramientas de gran tamañonúcleo del inductor mutuo con silicio acero CRGOAluzinc bobina de acero AZ100g/m2 galvanizada, acero del Galvalume, China planta Comat Haidahoja de acero eléctricaLaminación EI-UI-TR silicio acero transformador núcleos fría no laminados granos orientados de acero eléctricohojalata y bobina de hojalata de barniz y hoja para el giro de producción de la tapa de la lacaTapa de plástico hermética con hebilla de acero para la producción de tarro cookybobina de acero galvanizada caliente de la venta de la fábricaPilas EI133.2B/CRNGO/ IE para transformadorEstaño libre acero para la fabricación de corcho de la corona (cápsulas)Estaño libre acero para la fabricación de corcho de la corona (cápsulas)Atornillar tapas 32mmSilicio eléctrico de acero 50W800 para ventilador base de transformadoresPrecio de hojalata Prime T3BAplaca de lata de aerosol de hoja de hojalata hojalata